We deliver Safety to Society through Sound

Mixers

Sub Categories

The M-9000M2 Digital Matrix Mixer combines a modular matrix mixer and digital signal processor (DSP) in a compact two rack package. This versatile modular unit is ideal for multi-zone paging, music distribution and room-combining applications and combines an enhanced GUI programming interface with exceptional audio quality. The M-9000M2 enables easily configured custom systems with up to eight mic/line inputs and eight outputs. It has two output channels with built-in DSP, including ten-band parametric EQ, compressor, delay, and more.

The M-864D is a 4U rack mountable Digital stereo mixer having 22 input channels including 8 monaural input channels and 7 stereo input channels, 6 output channels including 4 monaural output channels and 1 stereo recording output channel, and 4 bus channels. It is equipped with digital signal processing functions such as Automatic resonance control function (ARC(*1)), Feedback suppressor function (FBS), Automatic stereo input mute function (AUTO MUTE or Ducker), and Equalizer.

The new TOA D-901 Digital Mixer is a fully modular, cost-effective digital mixer featuring a 12-input, 8-bus, 8-output channel configuration (12 x 8 matrix) with easy operation that can be expanded as applications require.

The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total, and to be mounted in an EIA standard equipment rack. A built in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control parts can accept optional plug-in modules, making the unit have a maximum of 32 inputs or outputs and up to 2 control modules.

The D-2012C, allows input and output channel signal levels to be monitored,
volume changes made as well as recalling preset memory settings, and contact control.

The SO-MIX-T-24V is a remote mixer input panel with an XLR microphone and RCA line level input. Both inputs are mixed to one output. Individual volume control with joint bass and treble control. Automatic mix with selectable Talkover function. 30dB, Talkover time: 3 seconds. Fits in standard 1-gang 50mm backbox.

SS9012 is a speaker selector used in conjunction with 9000M2 Series mixer amplifiers or other paging equipment. It selectively distributes each of 2 amplified inputs of the same 12 output zones by the status of corresponding contact closure input.

  • Simple, low-cost solution for multi-zone paging with minimal equipment
  • Works with 9000M2 GUI software v2.0
  • In Paging Matrix-New Paging sync function allows up to 12 synchronized contact-outputs along with each page event
  • Each sync point controls an independent C-OUT connection, which in turn activates the independent speaker outputs on the Q-SS9012PS
  • High-sensitivity electret-condenser gooseneck mic for clear voice
  • 12 zone select buttons, All Call, Clear
  • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring)
  • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T)

The NM-01 is a sound masking module to be used in conjunction with TOA’s 9000M2, series.

The DP-SP3 is a 1U rack mountable Digital speaker processor having 2 inputs and 6 outputs. It features digital signal processing functions such as Equalizer, Crossover, Matrix, Compressor, and Delay. Other functions include input PAD, analog output attenuator, output MUTE, EQ characteristic library for TOA speakers, and contact input terminals. When connected to a LAN, settings and operations of the DP-SP3 can be performed on a PC with the supplied DP-SP3 PC Software installed. It can be mounted in an EIA component rack (1U size).

The DP-K1 DIGITAL MIXER / PROCESSOR is the ideal solution for a wide variety of installed sound applications including houses of worship, sports facilities, convention centers, airports, and many others. The DP-K1’s modular design supports up to eight mic/line inputs and eight line outputs with flexible contact-closure remote control.

The advanced new Automatic Resonance Control (ARC) measurement and processing algorithm from TOA, improves speech intelligibility and sound quality in facilities with challenging acoustic environments. ARC automatically identifies room mode frequencies and applies an inverse response curve to compensate for the measured room response.

Additional audio processing tools include multi-band parametric filters, compressors, limiters, noise gates, crossovers, delays and more. Full input-to-output matrixing allows users to store and recall any input to output combination for multi-zone or room-combining applications. The unit is programmed via PC control software and includes a built-in network interface for remote access.

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9013 is a wall mounted remote control panel having 8 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 2-gang electrical box in the wall.

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9014 is a wall mounted remote control panel having 4 buttons and 1 volume control knob. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons, and input or output channel’s volume adjustment to the volume control knob. It can be mounted in an American standard 2-gang electrical box in the wall.

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9012 is a wall mounted remote control panel having a volume control knob. It is used in conjunction with the RC-001T Remote control module. The volume control knob can be set on which channel of input or output to adjust volume level. It can be mounted in an American standard 1-gang electrical box in the wall.

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9011 is a wall mounted remote control panel having 4 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 1-gang electrical box in the wall.

The RC-001T is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC 001T.

The ZM-9003 is a remote control switch panel with 4 interlocking selection switches and 2 momentary switches. Connecting it to the 9000 series amplifier’s control input terminal permits various controls such as BGM source selection and the sound volume adjustment. It can be mounted in an American standard 2-gang electrical box in the wall.

The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

The M-633D is a stereo mixer equipped with 12 input channels (6 monaural inputs and 3 stereo inputs) and 6 output channels (2 monaural outputs, 1 stereo output, and 1 stereo recording output). It has 2 monaural channel and 1 stereo channel bus lines, allowing each input signal to be assigned to each bus line individually. 1 Stereo input is located on the front panel for easy connection of audio/MP3 players.

The D-2000DA1 Line Output Module is designed to be used with the D-2008SP Digital Mixing Processor Unit and features high sound quality. The output levels of each terminal can be individually set to +4dB or -10dB and its output mode independently set to either balanced or unbalanced type by the built-in DIP switch.

The D-2000AD1 is a 4 channel Microphone/line Input Module designed for use with the D-2008SP Digital Mixing Processor Unit

CobraNet was developed by Cirrus Logic, a US company and is a network protocol utilizing Ethernet networks to perform high-quality multi-channel digital transmission. It allows using existing Ethernet equipment such as CAT-5 switching hubs.

The ZM-9001 is a remote control switch panel used with the 9000 series amplifiers. It provides an additional 6 control inputs of amplifier expansion, and can be mounted in an American standard 1-gang electrical box in the wall.

The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall.

The SS-9001 is a speaker selector used with the ZP-001T zone paging module. It outputs 2 input signals to 4 different zones.

The AN-001T is a plug-in module of 2-channel ambient noise detector designed for use with the M-9000.
It automatically adjusts the output volume in response to the change of ambient noise level. The AN-001T can handle input signals from microphone level (-60dB) to line level (-10dB) by controlling the gain in 9 steps. Phantom power (+24V) can be supplied for condenser microphone use.

The ZP-001T is a zone paging module designed for use with the M-9000 and functions as interface to connect the M-9000 to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.

The C-001T is Control I/O expansion module designed for use with the M-9000 and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output can be expanded to up to 12 channels each when the C-001T is used.

The T-001T is a plug-in module designed for use with the M-9000 and provide two independent balanced outputs. It can drive load of 600Ω up to +16dB. It can process effect for TONE/EQ/ COMPRESSOR to two inputs independently.

The AN-9001 is an electret condenser microphone designed for ambient
noise sensing. It is used in conjunction with the AN-001T Ambient Noise control module in the M-9000. It can be mounted in an American Standard 1-gang electrical box in the ceiling or wall.

The D-001T is a plug-in module designed for use with the M-9000 and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60dB to -10dB. Phantom power (+24V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

Digital audio processor adjusts BGM/announcement sound volume to match changes in listening area noise levels.

The TOA DP-L2 Digital Ambient Noise Controller is the easy, automatic solution to the problem of keeping BGM and announcements audible and understandable when the ambient noise levels at an airport check-in counter or boarding gate, or a shopping mall, restaurant or pub, are higher because a large number of people are present. Furthermore, the DP-L2 also works to keep music and information audio from reaching levels that are irritating to customers and staff when the surrounding ambient noise levels are not so high.

24 inputs 16 outputs
For external remote control of memory presets, gain control, stereo input selection and channel ON/OFF operation plus tally outputs.

4-channel digital output module. With the use of this module, digital signals can be output, permitting direct connection of the D-901 to equipment having a digital input.

2-Channel digital input module. With the use of this module, digital signals can be input, permitting direct connection of the D-901 to equipment having a digital output. Owing to the
built-in sample rate converter, it can handle signals of various sampling frequencies. 2-Channel digital input module. With the use of this module, digital signals can be input, permitting direct connection of the D-901 to equipment having a digital output. Owing to the
built-in sample rate converter, the module can handle signals of various sampling frequencies.

A dedicated VCA fader unit that significantly expands the operational scope of the D-901 Digital Mixer. It adds useful control capabilities when connected to the D-984VC. In such a connection setup, full VCA operation becomes possible, allowing all the D-901’s 12 inputs and 8 outputs channel gain levels and 8 contact controls.

The M-243 is a 19″ rack-mountable stereo mixer that comes with two monaural inputs, four stereo inputs, one stereo output and two monaural outputs.

The D-981 allows external remote control of memory presets, volume control, stereo input selection and channel ON/OFF operation.

The D-971R has 4-channel line outputs with standard RCA pin jack.

The D-971E has 4-channel line outputs with removable terminal block connectors.

The D-971M has 4-channel line outputs with XLR connectors.

The D-922E is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with removable terminal block connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.

The D-922F is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with XLR connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.

The D-921E is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with removable terminal block connectors, adjustable input sensitivity as well as phantom power.

The D-921F is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with XLR connectors, adjustable input sensitivity as well as phantom power.

Close Menu
Copied!